XYExtracted_Clams
Metadata also available as
Metadata:
- Identification_Information:
-
- Citation:
-
- Citation_Information:
-
- Originator: Stacy Galleher, ODFW
- Publication_Date: 5/2009
- Title: XYExtracted_Clams
- Edition: Final
- Geospatial_Data_Presentation_Form: vector digital data
- Online_Linkage: \\fwchax\Data\GIS maps and files\SEACOR geodatabase\SEACOR.mdb
- Larger_Work_Citation:
-
- Citation_Information:
-
- Originator:
-
Caren E. Braby, Alix Laferriere, Stacy Galleher, Meghan Massaua, and Litzy Venturi
- Publication_Date: 6/2009
- Title: Shellfish and Estuarine Habitat Assessment of Coos Bay, Oregon
- Edition: Final
- Publication_Information:
-
- Publication_Place: Newport, OR
- Publisher: Oregon Department of Fish and Wildlife
- Other_Citation_Details:
-
Oregon Department of Fish & Wildlife
2040 SE Marine Science Drive
Newport, Oregon
- Online_Linkage: <http://www.dfw.state.or.us/mrp/shellfish/Seacor/index.asp>
- Description:
-
- Abstract:
-
Biometric measurements (length, width, weight) and average calculations of all clams extracted from the Core quadrat (1 m2 x 35 cm) and up to 10 targeted gapers from 8 m2 area during DAM sampling.
- Purpose:
-
SEACOR, Shellfish and Estuarine Assessment of Coastal Oregon, a focused project within Oregon Department of Fish and Wildlife (ODFW), documenting the distribution and abundance of recreationally important bay clam species. The targeted clam species are Tresus capax (Gaper), Saxidomus gigantea (Butter), Protothaca staminea (Native Littleneck) and Clinocardium nuttallii (Cockle). Our sampling design was two tiered: 1) a superficial and extensive Rapid Assessment Method (RAM), with evenly spaced sampling to cover all extents of each tide flat and 2) a thorough and limited Detailed Assessment Method (DAM), with randomly generated points within known bivalve habitat. Habitat classification and environmental and biological variables that could be determined by visual observation were recorded for a 1 m2 quadrat ('XYEnvironmental_factors). For DAM a 1 m2 quadrat was dug down to 35 cm making a CORE and was visually assessed for target species (biometrics are found in the 'XYExtracted_Clams' layer). SEACOR is funded by recreational shellfish license fees and captures a snapshot of the status of Oregon's estuarine resources for baseline data and for comparison to past (ODFW 1970's raccoon reports) and future studies. The SEACOR project initially targeted intertidal flats of the lower Coos Bay Estuary during 2008-2009. All results from this study are presented in a formal ODFW report and further information can be found at <http://www.dfw.state.or.us/mrp/shellfish/Seacor/index.asp>.
- Time_Period_of_Content:
-
- Time_Period_Information:
-
- Single_Date/Time:
-
- Calendar_Date: 2008-2009
- Currentness_Reference: publication date
- Status:
-
- Progress: Complete
- Maintenance_and_Update_Frequency: None planned
- Spatial_Domain:
-
- Bounding_Coordinates:
-
- West_Bounding_Coordinate: -124.326334
- East_Bounding_Coordinate: -124.296664
- North_Bounding_Coordinate: 43.379782
- South_Bounding_Coordinate: 43.331190
- Keywords:
-
- Theme:
-
- Theme_Keyword_Thesaurus:
-
REQUIRED: Reference to a formally registered thesaurus or a similar authoritative source of theme keywords.
- Theme_Keyword: Bay Clam
- Theme_Keyword: Estuarine
- Theme_Keyword: Shellfish
- Theme_Keyword: ODFW
- Theme_Keyword: tide flat
- Place:
-
- Place_Keyword: Coos Bay
- Place_Keyword: Oregon
- Access_Constraints: None
- Use_Constraints:
-
This product is for informational purposes and was not prepared for legal, engineering or surveying purposes. Users of this information should review or consult the primary data and information sources to ascertain the usability of the information. The State of Oregon or any of the data providers cannot accept any responsibility for errors, omissions, or positional accuracy in the digital data or underlying records. There are no warranties, expressed or implied, including the warranty of merchantability or fitness for a particular purpose, accompanying any of these products.
- Point_of_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Jean McCrae
- Contact_Organization: Oregon Department of Fish and Wildlife
- Contact_Position: Shellfish Program Leader
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 2040 SE Marine Science Drive
- City: Newport
- State_or_Province: OR
- Postal_Code: 97365
- Country: United States of America
- Contact_Voice_Telephone: 541-867-4741
- Contact_Electronic_Mail_Address: jean.e.mccrae@state.or.us
- Native_Data_Set_Environment:
-
Microsoft Windows XP Version 5.1 (Build 2600) Service Pack 3; ESRI ArcCatalog 9.3.1.1850
- Data_Quality_Information:
-
- Lineage:
-
- Process_Step:
-
- Process_Description: Metadata imported.
- Source_Used_Citation_Abbreviation: C:\DOCUME~1\gallehs\LOCALS~1\Temp\xml8A.tmp
- Process_Date: 20090521
- Process_Time: 10064000
- Spatial_Data_Organization_Information:
-
- Direct_Spatial_Reference_Method: Vector
- Point_and_Vector_Object_Information:
-
- SDTS_Terms_Description:
-
- SDTS_Point_and_Vector_Object_Type: Entity point
- Point_and_Vector_Object_Count: 45
- Spatial_Reference_Information:
-
- Horizontal_Coordinate_System_Definition:
-
- Geographic:
-
- Latitude_Resolution: 0.000000
- Longitude_Resolution: 0.000000
- Geographic_Coordinate_Units: Decimal degrees
- Geodetic_Model:
-
- Horizontal_Datum_Name: North American Datum of 1983
- Ellipsoid_Name: Geodetic Reference System 80
- Semi-major_Axis: 6378137.000000
- Denominator_of_Flattening_Ratio: 298.257222
- Entity_and_Attribute_Information:
-
- Detailed_Description:
-
- Entity_Type:
-
- Entity_Type_Label: XYExtracted_Clams
- Entity_Type_Definition: Environmental Parameters measured in RAM and DAM
- Attribute:
-
- Attribute_Label: OBJECTID
- Attribute_Definition: Internal feature number.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain:
-
Sequential unique whole numbers that are automatically generated.
- Attribute:
-
- Attribute_Label: ID
- Attribute_Definition:
-
Unique identifyer with working region "-" waypoint number (i.e. CI - 234 = Clam Island waypoint 234). DAM samples are PP, CI, SS "-" 800 to 900. RAM samples are all other location number combinations
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: Lat
- Attribute_Definition: Latitude created by AlaskaPak in decimal degrees
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: Long_
- Attribute_Definition: Longitude created by AlaskaPak in decimal degrees
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_n
- Attribute_Definition: Butter N number (count)
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_Leng
- Attribute_Definition: Average Butter length; measured anterior to posterior in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_LengSD
- Attribute_Definition: Calculated standard deviation of lengths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_Wid
- Attribute_Definition:
-
Average Butter width (or fatness); measured in the dorsal-ventral plane, where the valves were widest in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_WidSD
- Attribute_Definition: Calculated standard deviation of average widths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_Wgt
- Attribute_Definition: Average Butter whole weight; measured in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_WgtSD
- Attribute_Definition: Average Butter weight calculated standard deviation
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: B_Biomass
- Attribute_Definition:
-
Butter Biomass; calculated as the average weight multiplied by the (N) of clams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_n
- Attribute_Definition: Cockle N number (count)
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_Leng
- Attribute_Definition:
-
Average Cockle Length; measured from anterior to posterior in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_LengSD
- Attribute_Definition: Calculated standard deviation of average lengths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_Wid
- Attribute_Definition:
-
Average Cockle width (or fatness); measured in the dorsal-ventral plane, where the valves were widest in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_WidSD
- Attribute_Definition: Calculated standard deviation of average widths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_Wgt
- Attribute_Definition: Average Cockle whole weight; measured in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_WgtSD
- Attribute_Definition: Average weight calculated standard deviation
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: C_Biomass
- Attribute_Definition:
-
Cockle Biomass; calculated as the average weight multiplied by the (N) of clams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_n
- Attribute_Definition: Gaper N number (count)
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_Leng
- Attribute_Definition: Average Gaper Length; measured from anterior to posterior in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_LengSD
- Attribute_Definition: Calculated standard deviation of average lengths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_Wid
- Attribute_Definition:
-
Average Gaper width (or fatness); measured in the dorsal-ventral plane, where the valves were widest in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_WidSD
- Attribute_Definition: Calculated standard deviation of average widths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_Wgt
- Attribute_Definition: Average Gaper whole weight; measured on a scale in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_WgtSD
- Attribute_Definition: Average Gaper whole weight calculated standard deviation
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_SWgt
- Attribute_Definition:
-
Average Gaper soft body weight; only the internal body (not shell) of the clam after dissection; measured in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_SWgtSD
- Attribute_Definition: Average Gaper soft body weight calculated standard deviations
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: G_Biomass
- Attribute_Definition:
-
Gaper Biomass; calculated as the average whole weight multiplied by the (N) of clams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_n
- Attribute_Definition: Littleneck N number (count)
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_Leng
- Attribute_Definition:
-
Average Littleneck Length; measured from anterior to posterior in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_LengSD
- Attribute_Definition: Calculated standard deviation of average lengths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_Wid
- Attribute_Definition:
-
Average Littleneck width (or fatness); measured in the dorsal-ventral plane, where the valves were widest in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_WidSD
- Attribute_Definition: Calculated standard deviation of average widths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_Wgt
- Attribute_Definition: Average Littleneck whole weight; measured in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_WgtSD
- Attribute_Definition: Average Littleneck weight calculated standard deviation
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: LN_Biomass
- Attribute_Definition:
-
Littleneck Biomass; calculated as the average weight multiplied by the (N) of clams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: core_n
- Attribute_Definition: N number (count) of all target species from the CORE
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: CORE_BIOMA
- Attribute:
-
- Attribute_Label: GG_n
- Attribute_Definition: Gapers from the 8m2 area around the Core N number (count)
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_Leng
- Attribute_Definition:
-
Gapers from the 8m2 area around the Core;Average Length; measured from anterior to posterior in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_LengSD
- Attribute_Definition: Calculated standard deviation of average lengths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_Wid
- Attribute_Definition:
-
Gapers from the 8m2 area around the Core; Average Gaper width (or fatness); measured in the dorsal-ventral plane, where the valves were widest in mm
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_WidSD
- Attribute_Definition: Calculated standard deviation of average widths
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_Wgt
- Attribute_Definition:
-
Gapers from the 8m2 area around the Core; Average Gaper whole weight; measured in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_WgtSD
- Attribute_Definition:
-
Gapers from the 8m2 area around the Core; Average Gaper whole weight calculated standard deviation
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_SWgt
- Attribute_Definition:
-
Gapers from the 8m2 area around the Core;Average Gaper soft body weight; only the body of the clam after dissection; measured in grams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_SWgtSD
- Attribute_Definition: Average Gaper soft body weight calculated standard deviations
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: GG_Biomass
- Attribute_Definition:
-
Gaper Biomass; calculated as the average whole weight multiplied by the (N) of clams
- Attribute_Definition_Source: SEACOR
- Attribute:
-
- Attribute_Label: Shape
- Attribute_Definition: Feature geometry.
- Attribute_Definition_Source: ESRI
- Attribute_Domain_Values:
-
- Unrepresentable_Domain: Coordinates defining the features.
- Detailed_Description:
-
- Attribute:
-
- Beginning_Date_of_Attribute_Values: April 2008
- Ending_Date_of_Attribute_Values: June 2009
- Distribution_Information:
-
- Resource_Description: Downloadable Data
- Metadata_Reference_Information:
-
- Metadata_Date: 20090521
- Metadata_Contact:
-
- Contact_Information:
-
- Contact_Person_Primary:
-
- Contact_Person: Jean McCrae
- Contact_Organization: Oregon Department of Fish and Wildlife
- Contact_Organization_Primary:
-
- Contact_Organization:
-
REQUIRED: The organization responsible for the metadata information.
- Contact_Person: REQUIRED: The person responsible for the metadata information.
- Contact_Address:
-
- Address_Type: mailing and physical address
- Address: 2040 SE Marine Science Drive
- City: Newport
- State_or_Province: OR
- Postal_Code: 97365
- Country: USA
- Contact_Voice_Telephone: 541-867-4741
- Metadata_Standard_Name: FGDC Content Standards for Digital Geospatial Metadata
- Metadata_Standard_Version: FGDC-STD-001-1998
- Metadata_Time_Convention: local time
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
- Metadata_Extensions:
-
- Online_Linkage: <http://www.esri.com/metadata/esriprof80.html>
- Profile_Name: ESRI Metadata Profile
Generated by mp version 2.9.6 on Thu May 21 10:18:28 2009